













NI MASCHINE+ STAND - 30 degrees - 3d printed - 100% Buyer Satisfaction
$41.62
$59.46
Availability:
In Stock-
Estimated Delivery:Apr 03 - Apr 10
-
Free Shipping & Returns: On all orders

Guarantee safe & secure checkout
- Free Shipping & Returns or all orders over
- Secure Payment We ensure secure payment
- Money Back Guarantee Any back within 30 days
30° tilted STAND with rubber pads for NI MASCHINE+This allow you to use
Maschine+ on your desk more ergonomic layout and it may affect about longer
flow state when writing music.- It is portable, easy to detach and attach again
- You can bring it to your live gig - forget the heavy laptop stands and weird
unstable things.This system has 2 pieces, just slip them from the correct
sides. 1 leg with hole for the left and 1 leg with cut-out for the right
side.You can handle USB sockets, and phones volume knob with this stand. It
will be tight enough to stand perfect on your desk without slip or
wobble.Pros:Very stable!Really lightweight and strong enough.There is no
connecting rod at the rear.Together with these legs, you can handle the device
as a cohesive system without worrying about it falling apart.It is portable,
easy to detach and attach againYou can bring it to your live gig - forget the
heavy laptop stands and weird unstable things.Cons: Unfortunately
decksaver is not fully compatible with this stand, but you can put on
carefully on Maschine+ and that will save your device against dust.Check
DustCoverPro for Maschine+ with elastic edges here:
https://www.ebay.com/itm/333908920408 MAIN FEATURE: It will be tight enough to
stand perfect on your desk without slip or
wobble.-----------------------------------------About st3nD tabletop stands:All
products are made with 3D printing, followed by some post-processing:
deburring, sanding, surface cleaning. The main goal is to develop and
manufacture high quality table stands with the following features:Easy
installation without glueing,screws or any tools. Stable feel, no sliping, free
of wobbling.Easy handle the stand and your device together as a cohesive system
without worrying about falling apart when moving. The system don't take up more
space sideways like the device own. Really lightweight and strong enough. No
middle rods or any stabilizers.Portable so you can bring it to your live gig
easily. These are the considerations I keep in mind when design and making
stands. I
try to lower prices as low it possible for save your bucks but look
after the quality too. I manufacturing these products one by one. So
these handmade stands are different than mass products. This is the
reason why they are not so so cheap as I want it too. I will make the
stand for you, just for you, so you can focus using your device more
ergonomic.Please check my other stands for various brands as: Native
instruments, Maschine, Ableton, Roland, Akai, Arturia, Digitakt, Novation,
Roland Boutique Serieshttps://www.ebay.com/str/st3ndIMPORTANT:The device is
only an illustration for the stand, which is not part of the sale!Shipping is
depend printing que, printing time, and your country distance and
shipping conditions (please be patient due covid delays :) )
Maschine+ on your desk more ergonomic layout and it may affect about longer
flow state when writing music.- It is portable, easy to detach and attach again
- You can bring it to your live gig - forget the heavy laptop stands and weird
unstable things.This system has 2 pieces, just slip them from the correct
sides. 1 leg with hole for the left and 1 leg with cut-out for the right
side.You can handle USB sockets, and phones volume knob with this stand. It
will be tight enough to stand perfect on your desk without slip or
wobble.Pros:Very stable!Really lightweight and strong enough.There is no
connecting rod at the rear.Together with these legs, you can handle the device
as a cohesive system without worrying about it falling apart.It is portable,
easy to detach and attach againYou can bring it to your live gig - forget the
heavy laptop stands and weird unstable things.Cons: Unfortunately
decksaver is not fully compatible with this stand, but you can put on
carefully on Maschine+ and that will save your device against dust.Check
DustCoverPro for Maschine+ with elastic edges here:
https://www.ebay.com/itm/333908920408 MAIN FEATURE: It will be tight enough to
stand perfect on your desk without slip or
wobble.-----------------------------------------About st3nD tabletop stands:All
products are made with 3D printing, followed by some post-processing:
deburring, sanding, surface cleaning. The main goal is to develop and
manufacture high quality table stands with the following features:Easy
installation without glueing,screws or any tools. Stable feel, no sliping, free
of wobbling.Easy handle the stand and your device together as a cohesive system
without worrying about falling apart when moving. The system don't take up more
space sideways like the device own. Really lightweight and strong enough. No
middle rods or any stabilizers.Portable so you can bring it to your live gig
easily. These are the considerations I keep in mind when design and making
stands. I
try to lower prices as low it possible for save your bucks but look
after the quality too. I manufacturing these products one by one. So
these handmade stands are different than mass products. This is the
reason why they are not so so cheap as I want it too. I will make the
stand for you, just for you, so you can focus using your device more
ergonomic.Please check my other stands for various brands as: Native
instruments, Maschine, Ableton, Roland, Akai, Arturia, Digitakt, Novation,
Roland Boutique Serieshttps://www.ebay.com/str/st3ndIMPORTANT:The device is
only an illustration for the stand, which is not part of the sale!Shipping is
depend printing que, printing time, and your country distance and
shipping conditions (please be patient due covid delays :) )
- Brand: st3ndstore
Submit Your Review
Your email address will not be published. Required fields are marked *