Takaab SAR - Gate Controlled Slew Limiter / Slide-Portamento / AR Envelope

The Takaab S.A.R (Slide, Attack, Release) is a voltage lag generator designed
primarily to function as either a portamento/slide circuit or an AR envelope
generator.

With both the push switches out (ON) a voltage applied to the main input will
be outputted with any rises or falls in voltage being slowed down dependant on
where the A (attack/rise) and R (release/fall) knobs are set to. Therefore,
inputting a 1v/oct control voltage will result in a portamento effect, whilst a
smooth rising and falling envelope can be generated by inputting a gate.

With the switches pushed in (AUTO) the lag effect will be normally off and
will be switched on whenever a gate signal is present at one or both of the
adjacent jack inputs. - If a jack is only inserted into one of these inputs
then any gate will affect both A and R. Plugging separate jacks into both the A
and R inputs will give independent gate switching of each of these parameters.

The ‘Curve’ knob gives control over the curve of the lag, ranging from nearly
linear to a logarithmic curve. It also somewhat effects the overall length,
with the lag becoming a little longer the more curved it is.

The range switch changes the range of the lag time: The centre position being
the shortest and is most useful for slides or portamentos. The top position is
the middle setting while the lower position is the longest range – most useful
for envelopes. At this range you may hear some lag even with A and R at their
lowest settings if using the unit as a portamento.

Size: 3cm (6HP) x 128.5cm x 6.1cm.

Module depth: 42mm.

1 signal input jack, one output jack, two gate input jacks to switch on A and
R parameters.

Package contents: 1x module, 1x 10 pin power cable, 2x 3M screws, Jumper.


Facebook Page: https://www.facebook.com/siammodular/

Website:
https://www.siammodular.com/takaab-sar-gate-controlled-slew-limiter-slide-portamento-ar-envelope